Atwood Bolt Swivel Jacks
Atwood Bolt Swivel Jacks are designed to allow the jack tube to swing easily from its horizontal transit position to the vertical stationery position, locking securely into place with a solid 1/2" diameter spring-loaded pin. The bolt design of the swivel holds the jack firmly against the mounting bracket, substantially reducing the side-to-side wobble while in use and virtually eliminates the annoying chatter during travel. The jacks are available in both weld-on and bolt-on versions that will fit all rectangular frames up to 3" wide and 3", 4", or 5" deep.

Atwood Retaining Ring Swivel Jacks

Zinc Plated for Marine Applications
Atwood retaining ring swivel jacks have been designed and tested considering requirements such as tongue-lifting capacities, side loading capacities, length of travel needed to accommodate tractor and other tow vehicle hitch heights, clearance of power take-off shafts and jack cycle life necessary to match equipment usage and life expectancy.

Mounting Brackets
Brackets, retaining ring, and when applicable, nuts, bolts and lock washers. 87502 87501 Bolt-on bracket fits frames 2" or 3" wide and 3", 4", or 5" deep. Weld-on bracket fits most frames. Bulk 25 quantity.

Atwood Power Jacks
Atwood Power Jacks make positioning a trailer hassle-free. The patented design and convenience of push button operation take the physical exertion out of cranking a trailer up or down. Simply push the button to quickly and effortlessly raise or lower the trailer into position with complete control. The Atwood Power Jack cannot change position until powered, giving you complete control over jack and trailer movement at all times. It is ideal for long-term storage, too.

Atwood jacks are not affected by temperature variations, providing solid, consistent performance regardless of the weather.

Permanently Lubricated
Our low maintenance jacks are carefully designed for years of convenient, trouble-free use. Manual override handle included.

Atwood A-Frame Jacks
A-Frame jacks, with triangular brackets, provide easy bolt-on or weld-on mounting through A-Frame couplers and are available in side and top-wind models. Casters or feet quickly install on jack ram. (Casters and feet must be ordered separately.)

Atwood Couplers
Atwood A-Frame couplers weld onto frame members set at 50° angles and are manufactured for S.A.E. class 3 and 4. These couplers are designed for demanding applications. They feature a jack mounting hole for easy installation and are available for 2" and 2-5 /16" ball size.

Atwood Hitch Balls
Atwood Mobile Products offers a variety of 2" and 2-5 /16" companion hitch balls to meet trailer towing applications from 5,000 to 40,000 lbs. gross vehicle weight. Forged or machined using high-strength fatigue-resistant steel, Atwood hitch balls are designed to mate with specific Atwood couplers for optimal fit, long life and trouble-free performance.

Each Atwood hitch ball comes complete with a lock washer and hex nut for quick, secure installation, and meets all applicable S.A.E. and D.O.T. standards.

Atwood Pro Stands
Atwood's NEW Pro Standsis the ideal answer for jacks with casters that have to be set on soft ground, surfaces that are not level or will be left in place for long periods of time. The large base easily supports the jack, caster and trailer. The high profile Pro Stand is great for between use storage where the boat can be left in a tilted position to allow it to drain.

Atwood Casters and Feet
Atwood casters and jack feet, with convenient "twist-lock", provide easy attachment to the jack and quick removal for towing. They mount on all Atwood A-Frame jacks.