|
|
|
Manual Tongue Jacks
Guides are only intended for use on Atwood™ products by service technicians who have successfully completed
Atwood™ training. This guide should be used in conjunction with the appropriate Instruction Manual provided
with the product and any applicable Industry Standards. This is not intended to be a complete list. Please
direct questions concerning service of Atwood™ products to 866-869-3118 option 5 before proceeding or
service@atwoodmobile.com
|
|
|
|
|
|
|
|
|
|
|
Handle Turns and Jack Leg Does Not Move
|
|
CONDITION
|
SOLUTION
|
|
Stripped bevel gears
Gear pin missing
Stripped acme nut
|
- Replace gears
- Replace pin
- Replace jack
|
|
|
|
DIFFICULT TO CRANK
|
|
CONDITION
|
SOLUTION
|
|
Too much tongue weight
Jack mounted at angle
Dry gears
Dirt in gears
Worn ball socket
Broken teeth on bevel gears
Binding thrust bearing
Stripped acme nut
Worn worm gear
Bent inner ram
|
- Verify wieght and determine if adequte rated jack has been used
- Reinstall jack perfectly vertical
- Grease gears
- Clean and grease gears
- Replace coupler
- Replace gears
- Replace bearing
- Replace jack
- Replace jack
- Replace jack
|
|
|
|
JACK LEG SEIZED
|
|
CONDITION
|
SOLUTION
|
|
Stripped acme nut
Stripped worm gear
Obstruction in gears
Bent inner ram
|
- Replace jack
- Replace jack
- Clean and grease gears
- Replace jack
|
|
|
|
|
|
* indicates NOT covered under warranty
|
|
|
|
|
|
|
